*Speech to text activated*

“This is Vexus with personal E.C.E. mods part two.”

“Today, I will be talking about one of weapon systems.”

“Not many that are still alive have seen me fight.”

“But those who still are, are apart of the company.”

“And I’d like to keep it that way.”

“Anyway!…”

“First off!”

“My pressure system.”

“This system is used both for both my tail and arms.”

“For my tail it is used to charge my thermal E.C.E. railgun.”

“And for my arms, it’s used as a way for my punches to have a bit more of a, well, punch.”

“The primary parts of this system are high powered E.C.E. grade fans and a pressure piston.”

“Now when on idle the fans are blowing inwards in order to work other functions, but I start charging one of the pistons the correlating fan reverses.”

“When this process begins, the path for the fans primary function closes up immediately.”

“Now as these fans are reversed they are now both pulling the piston up and creating a vacuum behind it.”

“Once the piston reaches full charge, the piston get locked, the fan stops spinning, and the vacuum gets blocked off in order to retain its pressure.”

“The piston can’t be left charged for too long though or else the system will start to over heat.”

“Only when the fan get’s reversed back it original direction does the vacuum and the piston get unlocked causing air to rush in making the piston slam back into it’s original position.”

“I did make sure to add a safety mechanism so that if the arms get too hot then the piston auto releases.”

“So…”

“With the arms that’s pretty much it.”

“With the pistons being in my forearms.”

“But when it comes to my tail…”

“The fans have no idle use so their idle is just off.”

“In fact the whole mod is completely useless if the heart is closed.”

“As soon as it opens, the fans turn on and starts charging.”

“While each arm only has one fan each, the railgun has four.”

“This is because it requires two for the pressure piston, and two for condensing and keep the E.C.E. inside the chamber.”

“While the arms piston are just parts of the arm, the railguns piston is completely internal and creates another vacuum in front to suck up the E.C.E. into the chamber.”

“The piston itself works the exact same way as the arms, but except when the pistons fans stop, the condensing fans will keep running until firing.”

“The longer I keep it condensing stronger the shot, but also the higher the chance of the mod getting destroyed.”

“Both while charging and after firing since the rails can also over heat from sitting there for too long.”

“Though this time I didn’t put a safety mechanism because if I’m needing to hold it for that long, then there is a good reason.”

“And the last thing I want it miss firing.”

“I did make sure to make them replaceable though.”

“So that way it’s never just a pump and dump.”

“Hooooooh that was a lot…”

“I think I need to go for a walk.”

*Speech to text deactivated*